77" x 18" Welex Sheet Extrusion Line

One used welex 77" wide sheet take-off unit consisting of three 77" face chrome rolls measuring nominal 18" in diameter. Unit is set up for downstack operation at approximately a 52-1/2" centerline height.

For more details on 77" x 18" Welex Sheet Extrusion Line click here

Kuhne 46.8" Extrusion Sheet Line

Kuhne 46.8" (1200mm) sheet line with a capacity of 550-600 lbs / 250-300 kgs of PS per hour consisting of: 1 feeding/blending system; 1 Kuhne single screw extruder, type K-70-30D, 30:1 L/D, 2.8" (72mmm) diameter screw, 5 zones electrically heated, air cooled, vented; 1 gear pump; 1 46.

For more details on Kuhne 46.8" Extrusion Sheet Line click here

Davis STD Downstack Sheet Extrusion Line

Used Davis standard sheet take-off unit consisting of (3) 48" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter. Top roll is tungsten and the middle and bottom are chrome.

For more details on Davis STD Downstack Sheet Extrusion Line click here

Amut Extrusion Line for PE, PP Pipes

Manufacturer: Amut
Maximum diameter: 125 mm
Minimum diameter: 40 mm

Extruder: Amut
- Screw diameter: 75 mm
- Number of screws: 1
- Screw L/D ratio: 30
- Output capacity: 450
- Main drive pow

For more details on Amut Extrusion Line for PE, PP Pipes click here