PP Strap Making Machine

We need a used PP strap making machine as follows:
- 10 straps
- Line speed: 140-150 m/min.
- We preferred European brand


For more details on PP Strap Making Machine click here

60 kg / hr PP Blown Film Plant

PP TQ Blown film plant with rotating die and auto loader
- Make: Fong Kee Taiwan
- Year: 1987
- All water contact part of SS. (bottom water receiver tank, excess water receiver sizing ring holder)

- Screw size: 65 mm
- Main motor: 22 KW DC with drive.

For more details on 60 kg / hr PP Blown Film Plant click here

40 inch Welex Co-ex Sheet Extrusion Line

Used Welex 40" wide co-ex sheet extrusion line, tested electrically and mechanically and to be shipped in working condition. Line consists of the following:
- 90mm (3.5") Welex single screw extruder with plugged vent.

For more details on 40 inch Welex Co-ex Sheet Extrusion Line click here

Large Diameter Pipe Extrusion Line

We are in need of large diameter HDPE pipe extrusion line. We need machines for pipe dia 630 mm onwards.

Machines should be in good working condition.

We can consider extruders without downstrea

For more details on Large Diameter Pipe Extrusion Line click here

Cast Film Line for PE Multilayer Films

We are looking for Cast film line to produce PE multilayer films with following properties:
- Film thickness: 15 to 30 microns
- Width: 2.4 meter
- 3 layer minimum


For more details on Cast Film Line for PE Multilayer Films click here

35" wide Welex Co-ex Sheet Extrusion Line

Used 35" wide Welex co-ex sheet extrusion line consisting of the following:

- Two 1.25" 24/1 co-extruders, each with approximately 10 hp DC motor with
SCR control.

- One 2.5" 30/1 extruder moddel 250 30/1 rhsv.

For more details on 35" wide Welex Co-ex Sheet Extrusion Line click here

Macchi 3 Layers Co-Extrusion Plant

- Made of 2 outer extruders of 55 mm diameter, 70 KW, and central one of 65 mm diameter, 80 KW.
- Still die
- Screw cutting dies of 180 and 250 mm.
- IBC system
- Automatic thickness control

- Control panels for thermoregulation
- Double, opposite winding station 1800 mm
- Filter switcher
- Cooling ring complete with fan
- Bubble driving system with ceramic rolls with vertical movement and automatic inflation connected to IBC
- 4 gravimetrical dosing and feeding units
- Haul off unit 1800 mm
- Corona treatment
- Cold needle micro perforator
- Output: 300 to 400 kg/hr
- Complete with 16 m.

For more details on Macchi 3 Layers Co-Extrusion Plant click here

TAU System 3 Layers Co-extrusion Plant

- Screw diameter: 65 mm, L/D 30
- DC engines, 88 hp
- Thermoregulation control panel in 6 areas for each extruder
- Lunik filter screen
- Screw cutting dies 200 mm and 350 mm with IBC and spar

For more details on TAU System 3 Layers Co-extrusion Plant click here

MAM 3 Layers Co-Extrusion Plant

- Composed by 3 MAM extruders diameter 100 mm
- Oscillating die
- Diameter 1800 mm screw cutting die
- Can produce agri film up to 12/13 mt.
- Screen switcher
- Without haul off unit, gusse

For more details on MAM 3 Layers Co-Extrusion Plant click here

Tiquattro 3 Layers Co-extrusion Plant

- Total height: 9000 mm
- Complete with gravimetrical dosing unit
- Oscillating die
- Haul off unit: 1600 mm
- Double winding station: 1600 mm
- Control boards
- Reel switcher
- Centrall and side slitting unit
- Output: Kg.

For more details on Tiquattro 3 Layers Co-extrusion Plant click here

60 inch Davis Standard Co-extrusion Line

Used 60" Davis Standard co-extrusion line. Line consists of the following:
- Extruder A: 100mm Davis Standard model 100MM35F, 30/1 L/D extruder. Electrically heated water cooled. Gearbox ratio is 17..

For more details on 60 inch Davis Standard Co-extrusion Line click here

HPM Sheet Take Off Unit and Cloren Masterflex Die

Used HPM sheet take off system including the following:
- 54" Cloeren Masterflex die with 45 degree restrictor bar, removable lower lip and quick gap. Mfd. 11/2006. Includes one spare lip.
- HPM moddel Sheet master III sheet take off having (3) 54" face x nominal 24" diameter rolls.

For more details on HPM Sheet Take Off Unit and Cloren Masterflex Die click here

Marshall and Williams Sheet Take Off Unit

(1) Used Marshall and Williams sheet take-off unit consisting of (3) 54" face rolls mounted in a vertical arrangement for a down stack operation. All three rolls measure 16" in diameter and are ceramiic coated.

For more details on Marshall and Williams Sheet Take Off Unit click here

Three Layer Co-Extrusion Plant

- The machine is 1600 mm wide, consists of two 55 mm extruders and one 75 mm extruder, all with revised screws and barrels.
- The head is a fixed one with IBC and double stage air ring.
- Bubble cagge, oscillating nip unit and edge guide unit also compose the machine.

For more details on Three Layer Co-Extrusion Plant click here

5 Layer Bubble Film Making Machine

- Extrusion line can be used for 5 and 4 layers laminating bubble film with pure aluminum foil (paper) and aluminum film and EPE foam, and 3 and 2 layers bubble film.
- Suitable for a wide spectrum oof materials, including LDPE, LLDPE, and recycled PE.

For more details on 5 Layer Bubble Film Making Machine click here

1250 mm Blown Film Plant

We need blown film extrusion plant
- Required output: 100 kgs./hr.
- Width: 1250 mm
- Thickness: 25 to 100 mm
- Must be less than 20 feet height
- Budget price: INR 10,00,000


For more details on 1250 mm Blown Film Plant click here

Sheet Extrusion Line

We need sheet extrusion line for processing ABS, HIPS, PP, UHMWPE, PET, HDPE with following properties:
- Max. width: 1600 mm
- Max. thick: 10 to 12 mm
- Output: 250 to 300 kg. / hr.
- Machine shoould be in good maintenance
- Preferred make: J.

For more details on Sheet Extrusion Line click here

16 feet Used Blown Film Plant

We need used blown film plant with following details:
- Material to be processed: LDPE/LLDPE
- Number of layers: Mono layer
- Maximum and minimum bubble size: Tube size 6 feet to 16 feet
- Output:: Anywhere between 450 to 1000 kgs.

For more details on 16 feet Used Blown Film Plant click here

Hosokawa Alpine 3 Layer, 1600 mm Co-extrusion Line

3-layer co-extrusion line: 65mm x 75mm x 65mm
- Working width: 1600mm
- 400mm diameter die head with dual lip air ring and IBC system
- Automatic thickness control with 152 segments; variation meaasurement with
capacitance sensor.

For more details on Hosokawa Alpine 3 Layer, 1600 mm Co-extrusion Line click here

Hosokawa Alpine 3 Layer, 3000mm Co-extrusion Line

3-layer co-extrusion line: 75mm x 120mm x 75mm
- Working width: 3000mm
- 600mm diameter die head with dual lip air ring and IBC system
- Automatic thickness control with 152 segments; variation meaasurement with
capacitance sensor.

For more details on Hosokawa Alpine 3 Layer, 3000mm Co-extrusion Line click here

HDPE Pipe Plant

We urgently need of HDPE pipe plant of 80 kg. to 100 kg. output or 120 kg. to 140 kg. output capacity.

For more details on HDPE Pipe Plant click here

Tecnomatic Extrusion Line for PE / PP Pipes

Model: LC-1.75.30S
- Maximum diameter: 110 mm
- Minimum diameter: 20 mm

Extruder: Tecnomatic LC-1.75.30S
- Screw diameter: 75 mm
- Number of screws: 1
- Screw L/D ratio: 30
- Output capacity:: 400
- Main drive power: AC KW
- Co-extruder: Yes

Die head: Tecnomatic LCP
- Year: 2003
- Pipe range diameter: 20-110

Calibration tank: Tecnomatic VV125/6.

For more details on Tecnomatic Extrusion Line for PE / PP Pipes click here

Kolsite Pipe Plant 200 kg/hr.

We have one old plant model KET-65/18V year of 1995-96 with DC drive
Model: KET-65/18V
- Output up to 200 kg per hour
- Die head: 200/400


For more details on Kolsite Pipe Plant 200 kg/hr. click here

50mm PP Plant and 4 Colour Flexo Printing Machine

50mm PP plant
- Make: Bolaani Engineering
- Year: 1998
- Condition: Not running

4 colour flexo printing machine
- Make: Pragati
- Year: 2000
- Condition: Not running


For more details on 50mm PP Plant and 4 Colour Flexo Printing Machine click here

Windmoller & Holscher 3 Layer Co-extrusion Line

- Size: 60x60x60mm
- Die: 315mm
- Haul-off: Oscillating
- Thickness control: Automatic
- +/-5 percent at 2-sigma for 50micron film
- Film width: 685mm to 1600mm
- 2 x 3 and 1 x 5 gravimetric do

For more details on Windmoller & Holscher 3 Layer Co-extrusion Line click here

Windmoller & Holscher 3 Layer Co-extrusion Line

- Size: 60x60x60mm
- Die: 315mm
- Haul-off: Oscillating
- Thickness control: Automatic
- +/-5 percent at 2-sigma for 50micron film
- Film width: 685mm to 1400mm
- 3x5 volumetric dosing system


For more details on Windmoller & Holscher 3 Layer Co-extrusion Line click here

1040mm Omipa / Welex Co-extrusion Sheet Line

- 120 mm Omipa single screw extruder. 35D vented (1988). 165 KW DC motor with drive
- Maag 56/56 gear pump with DC motor and drive
- 860 mm wide EDI R 75 flex lip sheet die with decal facility
- 10040mm wide Welex 3 roll polishing stack model 17x41SLRH.

For more details on 1040mm Omipa / Welex Co-extrusion Sheet Line click here

3 Layer Blown Film Plant

We are in need of 3 layer blown film plant
- Width 1000 mm to 1200 mm
- Preferred brands: W&H, Reifenhauser
- Machine should be 10 years or younger

For more details on 3 Layer Blown Film Plant click here

7 Layer Film Plant

We are looking for a 7 layer film plant
- Machine should be under power
- Width: 1200 mm to 1500 mm
- Preferred brands: Brampton, W&H, Alpine or other reputed brands
- We can also consider a 5 lay

For more details on 7 Layer Film Plant click here

Windsor PVC Pipe Plant

We need PVC pipe plant for portable water supply and casing
- Screw diameter.: 40m to 200 mm
- Production output: 150 to 250 kgs
- Preferred brand: Windsor
- Budget: INR 15,00,000 to INR 20,00,000

For more details on Windsor PVC Pipe Plant click here

Battenfeld PVC Pipe Line

Battenfeld 32-250mm PVC Pipe Line
- Type: BEX 2-90-22 V
- Screw Diam. 2 x 90 mm
- L/D: 22
- Capacity appr.: 180 to 300 kg/h
- Drive: 44 KW
- PVC, DC drive, venting, counter rotation, dosing unit

For more details on Battenfeld PVC Pipe Line click here

Barmag Co-extrusion Sheet Film Line

Part-refurbished Co-extrusion sheet film line for thermoforming applications
- Year 1994 refurbished 2008
- Power connection: 3 x 380/400 volts 50 c/s
- Melting capacity: Max. approx. 400 kgs/h, deepending on constant material supply from buyer in required quality and quantity, and realistic film sizes
- Line speed: Max.

For more details on Barmag Co-extrusion Sheet Film Line click here

Weber PVC Pipe Line

Weber 32-250mm PVC pipe line
- Type: DS 125
- Screw Diam. 2 x 125 mm
- Capacity appr.: 300 to 400 kg/h
- Drive: 60 KW
- PVC, venting, counter rotation, comutator
- Parallel screws
- Pipe head RRK 250 for pipes up to 250mm
- Calibration bath ca.

For more details on Weber PVC Pipe Line click here

Lohia Tape Line

We are looking for tape line with following details:
Output in the range of 350 - 700 kgs/hr
- Above year 2000
- Only Lohia Make
- Must be in good running condition
- Complete plant


For more details on Lohia Tape Line click here

Monolayer Blown Film Plants

We have two monolayer blown film plants for sale
1) Windsor 55 mm screw
- Output: 100 kgs/hr
- Age: 10 years
- Price: INR 8,00,000

2) Padmatex 65 mm Reifenhauser
- Output: 150 kgs/ hr
- Age:

For more details on Monolayer Blown Film Plants click here

Cincinnati Extrusion Line for PVC Profiles

Model: Argos EA 93P-26D-37-23-110-UT
- Output capacity: 380 kg/h
- Extruder: Argos 93P
- Screw diameter: 93 mm
- Number of screws: 2
- Screw configuration: Parallel
- Screw L/D ratio: 26
- Runnning hours: 6.

For more details on Cincinnati Extrusion Line for PVC Profiles click here

Davis Standard / Egan PET Sheet Line

One used Davis Standard / Egan 4-1/2" (120mm nominal diameter) extruder, 32:1 L:D, vented, air cooled barrel, heavy duty gear reducer, 250 HP (190 KW) main drive motor including full temperature contrrol panels, drive controller, 6" (150mm) screen changer hydraulic slide plate type with hydraulic power pack, included.

For more details on Davis Standard / Egan PET Sheet Line click here

HPM Sheet Line

Used HPM sheet line consisting of:
- (1) HPM 4-1/2'' single screw extruder, model 4.5TMIII. Approximately 30 to 1 L/D ratio. Electrically heated, water cooled 6 zone non-vented barrel, with pump, annd heat exchanger, no holding tank.

For more details on HPM Sheet Line click here

Cast Film Line for PET

We are looking for cast film line for PET in both for virgin and recycled with following properties:
- Thickness: 0.05 mm to 0.20 mm
- Width: 1200 mm
- Production around 150 kg/h


For more details on Cast Film Line for PET click here

NRM 3.5" Pipe and Profile Line

- NRM 3.5" PM III extruder
a. 32:1 L/D ratio
b. 100 HP, 1750 rpm motor
c. 17.44:1 gearbox ratio
d. Water cooled, non-vented extruder
e. Year: 1996
- Pro Rate 4-station color blender
- Gatto vvacuum sizing tank
a.

For more details on NRM 3.5" Pipe and Profile Line click here

30" Wide Berlyn Sheet Line

Consisting of:
- 4.5" Berlyn extruder
- 24:1 L/D ratio
- Water cooled barrel
- Belt driven Reliance 150HP DC motor
- Burton Industries speed stat VI drive
- 500 Volt
- 13.95/1 gear box ratio

- Gear box rating 222
- 1.

For more details on 30" Wide Berlyn Sheet Line click here

42" Wide Egan Sheet Extrusion Line

- Extruder vented barrel
- Screw size: 3.5"
- L/D ratio: 28:1
- Cooled water
- Horsepower 100 direct current
- Voltage: 480
- Controls Omron E5CK
- Includes 3-roll vertical chrome stack (rreplaced 2005) 12" OD x 42" wide
- 1 heavy duty die 39" wide
- 3.

For more details on 42" Wide Egan Sheet Extrusion Line click here

PVC Pipe Plant

We have available a PVC pipe plant details as under:
- Kolsite make twin screw 90mm extruder of 1997.
- Sizes of PVC pipes can be made minimum 90mm to 400mm.
- Average production capacity 250 kg too 350 kg.

For more details on PVC Pipe Plant click here

PVC Pipe Line

We are looking for PVC pipe line as per requirements as under:
- Extrusion machine Windsor twin screw RC 100
Temperature zone (extruder) 150 to 200 deg. C. adjustable with PID controller
Vacuum tannk & vacuum pump
- Die sizes: 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm
MOC: MS with hard core plating, single piece die without joint,
Die construction: vacuum sizing (20, 25, 32) pressure sizing (40mm to 110mm)
- Die head 2 nos.

For more details on PVC Pipe Line click here

Kolsite Pipe Plant 200 kg/hr.

We have two old plant model KET-65/18V year of 1994-95 and 1997-98.
Model: KET-65/18V
- Output up to 200 kg per hour
- Die head: 200/400 and one pin and bush with traction, cutter and spray tank aand tilting table
- Size: 63mm to 200mm
- DC drive make: IEEC (all three drive) and Siemens make
- One mixer cooler 60 Kgs/hr.

For more details on Kolsite Pipe Plant 200 kg/hr. click here

2 Layers Blown Film Line

This line is for production of 1 and/or 2 layers co-extrusion for production of heavy duty tubular film.
- Output: 180 Kg/hour

Materials to be processed:
- LDPE, LDPE / LLDPE blends
- LDPE / HDPPE blends
- LDPE + EVA (external layer)
- LDPE + VLOPE

Product specifications:
- Tubular film widths with die diam.

For more details on 2 Layers Blown Film Line click here

PVC Pipe Plant

We are looking for pipe plant for PVC pipes
- Prodn. output: Approx. 250-300 kgs/hr.
- Preferred brand: Windsor, Kolsite


For more details on PVC Pipe Plant click here

Multilayer Cast Extrusion Lines

1) Reifenhauser/Bandera 3 layer cast line
- Year: 1994
- 3 x extruders
- Screen changers
- Automatic die head
- Chill roll
- Thickness control
- Automatic rewinder
- Film width: 2600mm

For more details on Multilayer Cast Extrusion Lines click here

PE Cast Film Line

We need used cast film line for producing sanitary napkin.
- Material: PE
- Film to be produced in width of 1.5 to 1.8 mtr.
- Capacity to manufacture 50 tons per month
- Machine should be in runniing condition.

For more details on PE Cast Film Line click here

Used PET Sheet Line

We are a leading manufacturer of PET sheets. We need a used PET sheet line primarily to manufacture 125 micron thick sheets.
- We can consider a machine that can produce a width of 1010 mm or a linee that can manufacture 1260 mm wide sheets.

For more details on Used PET Sheet Line click here

PVC Pipe Plant

We are looking for PVC pipe plant as per following requirements:
- Type of pipe: As per IS : 4985 OR IS : 12818 (U-R PVC PIPES)
- Size of pipe: Category 1 - 16mm to 110mm, Category 2 - 90mm to 250mmm
- Production output: 110kgs to 350kgs / hr
- Acceptable age of the machine: 5 yrs.

For more details on PVC Pipe Plant click here

MPM 5 Layer Film Line

Make: MPM
- Type: 5 layer film line, comprising of 5 x 63.5mm extruders with screen changers on all lines
- Fixed IBC head with 300mm die
- Dual flow air ring
- Calibrating cage
- Rotating take ooff - 1500mm wide
- Edge guide
- Double turret winder - 1500mm wide
- Corona treater
- Automatic thickness control system.

For more details on MPM 5 Layer Film Line click here

PVC Pipe Plant for SWR Pipes

We are looking for PVC pipe plant to manufacture SWR pipes of diameter upto 110 mm
- Acceptable age of the machine would be around 5 to 6 years
- Preferred brand: Windsor or Kolsite (others also pre

For more details on PVC Pipe Plant for SWR Pipes click here

PP Film Extrusion Plant

We are looking for PP film extrusion plant
- Required film width: 7" to 30"
- Prefer 4 to 5 years old plant

For more details on PP Film Extrusion Plant click here

Battenfeld 7 Layer Film Line

Type: Battenfeld 7L-2000-99
- 4 x 50mm extruders, 3 x 65mm extruders screen changers on all lines
- Fixed IBC head
- 400mm die
- Dual flow air-ring
- Calibrating cage
- Rotating take off 20

For more details on Battenfeld 7 Layer Film Line click here

Alpine 3 layer Film Lines

1) Alpine 3 layer film line
- Type: Alpine 3L-1600-04
- Year: 2004
- 2 x 65mm extruders, 1 x 75mm extruder screen changers on all lines
- Fixed IBC head
- 250mm die
- Calibrating cage
- Osc

For more details on Alpine 3 layer Film Lines click here

3 Layer Blown Film Plant

We are interested to purchase 3 layer blown film plant
- Brand: Windsor /Mamta
- Latest technology
- Year of manufacturing after 2005
- Good running condition in best prices


For more details on 3 Layer Blown Film Plant click here

Used Blown Film Plant

We looking for used blown film plant to process
LDPE/LLDPE/HDPE.
- Output needed is minimum 100 kgs per hr.
- It should have corona treater rotating die and bubble stabilizer. The min. width of bbubble is 1000mm.

For more details on Used Blown Film Plant click here

Complete HDPE Pipe Line

We are leading pipe producer in India. We are in need of complete HDPE pipe line to produce 1000 mm pipes. Line should be later than 2000. We need machines in excellent condition.


For more details on Complete HDPE Pipe Line click here

Fully Reconditioned PET Cast Sheet Line

PET sheet line has complete new controll, new wiring, new motors on the callander,
refurbished coex block etc

BARMAG extruder, type 9E8-33D, for layer "B", consisting of: 90 mm extruder with AC-mmotor 132 kW barrel with electric heater belts, cooling blowers, new thermo couples screw with possibility for internal cooling with new Dynisco melt pressure sensor.

For more details on Fully Reconditioned PET Cast Sheet Line click here

Co-extrusion sheet film line for thermoforming

BARMAG extruder, type 9E8-33D, for layer "B", consisting of : 90 mm extruder with AC-motor 132 kW barrel with electric heater belts, cooling blowers, new thermo couples screw with possibility for intternal cooling with new Dynisco melt pressure sensor.

For more details on Co-extrusion sheet film line for thermoforming click here

Used 3 Layers Co-extrusion Line

We urgently need to buy coextrusion line 3 layers
The products to be manufactured are
- Basic packaging for: Sugar, rice, salt, chicken, water, milk, some AG plastics like mulch, etc.
- LDPE, HDPEE, LLDPE, PP
- 3 layer 3 extruders (ABC)
- Layflat: 1600 approx
- Output: 250 to 300 kl/hr approx.

For more details on Used 3 Layers Co-extrusion Line click here

PP flute board (Hollow Sheet) Extrusion Line.

We are looking for a used PP flute board (hollow sheet) extrusion line.
- Width of sheet to be produced: 2 meters
- Hollow sheet thickness to be manufactured: 2 mm to 8 mm / 10 mm
- Machine should

For more details on PP flute board (Hollow Sheet) Extrusion Line. click here

Davis Standard PS Foam Sheet Line

Used Davis standard / Sencorp Tandem foam line. Equipment new or rebuilt 1997. Last used to make 52-1/2" wide finished sheet line.

Line includes the following:
- (1) Used 4.5" 32:1 Gloucester exttruder with 200 hp drive.

For more details on Davis Standard PS Foam Sheet Line click here

LDPE Cast Film Line

We want LDPE cast embossed of 1800 mm width.
- Application Rubber release film
- Less than 80,000 dollar


For more details on LDPE Cast Film Line click here

Neptune make HM LD Extrusion Blown Film Plant

We have 2 extrusion blow film lines of Neptune make installed in 2004.

All machines were used for producing export bags from 2004 - 2006. Since then these machines have been sparingly used and main

For more details on Neptune make HM LD Extrusion Blown Film Plant click here

Cincinnati Pipe Plant 250 kg/hr

We have a used Cincinnati, Austria PVC Pipe plant model CM-65. Plant is equipped with AC drive with output upto 250 kg per hour size upto 250 mm

Extruder: CM 65 output up to 250 kg per hour with diie head two nos.

For more details on Cincinnati Pipe Plant 250 kg/hr click here

40" Welex Co-ex Sheet Extrusion Line

Used Welex 40" wide co-ex sheet extrusion line, tested electrically and mechanically and to be shipped in working condition. Line consists of the following:
- 115mm (4.5") Welex single screw extruderr with 7-zone water cooled vented barrel.

For more details on 40" Welex Co-ex Sheet Extrusion Line click here

PET Sheet Line

- Material: PET, HMWPE, Polypropylene and HDPE.
- One used HPM 1987 4.5" (120mm nominal), 38:1, 250hp 1987 double-vented extruder with the vents currently plugged to run polyethylene and PET. Vent sstacks are included with the extruder.

For more details on PET Sheet Line click here

Breyer Sheet Line

Extruder - Breyer Model # 190-313-24-1
- 150 hp DC drive.
- Screw type - two stage, adjustable. 3.5", 32:1 L/D. Screw replaced June 23, 2004
- Barrel - vented - grooved, water jackketed feed zone.

For more details on Breyer Sheet Line click here

Ghioldi Stretch Film Extrusion Line

- Capacity of the line: 400 kg/h
- Max film width: 1600 mm
- Film structure: A 15 percent - B 70 percent - C 15 percent
- Number of Extruders: 3

Extruder A:
- Screw diameter: 60 mm
- L/D: 30 D
- Motor: Siemens, D.

For more details on Ghioldi Stretch Film Extrusion Line click here

PVC Downstream for Pipes upto 630 mm

Vacuum tank
- Manufacturer: Battenfeld
- Year: 1989
- Pipe range: 110mm – 630mm
- Vacuum pumps: 2
- Length: 6 meter

Cooling tank
- Manufacturer: Battenfeld
- Year: 1989
- Pipe range: 110mm

For more details on PVC Downstream for Pipes upto 630 mm click here

Pipe Plant for UPVC Pipes

- Pipe material: UPVC pipes.
- Type of pipe: Water supply / drainage / electrical conduits.
- Size of pipe: 2" to 6" or 56 mm to 200 mm.
- Production output: App. 200 kg/hour.
- Acceptable age off machine: 15 years or so.

For more details on Pipe Plant for UPVC Pipes click here

Welex PET Extrusion Film Line

- Material: PET Extrusion line
- Year: 1986 (refurb 2005)
- Screws:
a. Extruder -1: 3.5" (110 KW, motor renewed 2007)
b. Extruder -2: 1.5"
c. Both extruders LD 30:1
- Colourtronic mixer
- Diee (Verbruggen Automatic Die) 920 mm
- Welex Melt pump
- Maag Screen Changer
- 3 Roll stack, Vertical.

For more details on Welex PET Extrusion Film Line click here

Welex Film Extrusion PS Line

- Material: PS
- Year: 1981 (refurb 2001)
- Screws:
a. Extruder -1: 3.5" (AC 100KW, new gearbox 2005)
b. Extruder -2: 1.5"
c. Both extruders LD 30:1
- Colourtronic mixer
- Die (Verbruggen Autommatic Die) 870 mm
- Maag Melt pump
- Maag extrusion line control system
- Gneuss Screen Changer
- 3 Roll stack, Vertical.

For more details on Welex Film Extrusion PS Line click here

High Output Stretch Film Cast Line

Black clawson extruders
- Extruder -1: 90 mm
- Extruder -2: 150 mm
- Extruder -3: 90 mm

EDI film extrusion die, which has been retro-fitted with a new auto-profile system.

New battenfeld windder in 1998.

For more details on High Output Stretch Film Cast Line click here

84" PTI Sheet Take Off Line

Used PTI model 842440 sheet take-off unit consisting of (3) 84" face chrome rolls mounted in a j arrangement for upstack operation. Bottom roll is 24" diameter while middle and top roll measure nominaal 40" in diameter.

For more details on 84" PTI Sheet Take Off Line click here