Thursday, August 20, 2009

Davis Standard / Egan PET Sheet Line

One used Davis Standard / Egan 4-1/2" (120mm nominal diameter) extruder, 32:1 L:D, vented, air cooled barrel, heavy duty gear reducer, 250 HP (190 KW) main drive motor including full temperature contrrol panels, drive controller, 6" (150mm) screen changer hydraulic slide plate type with hydraulic power pack, included.

For more details on Davis Standard / Egan PET Sheet Line click here

HPM Sheet Line

Used HPM sheet line consisting of:
- (1) HPM 4-1/2'' single screw extruder, model 4.5TMIII. Approximately 30 to 1 L/D ratio. Electrically heated, water cooled 6 zone non-vented barrel, with pump, annd heat exchanger, no holding tank.

For more details on HPM Sheet Line click here

Cast Film Line for PET

We are looking for cast film line for PET in both for virgin and recycled with following properties:
- Thickness: 0.05 mm to 0.20 mm
- Width: 1200 mm
- Production around 150 kg/h


For more details on Cast Film Line for PET click here

NRM 3.5" Pipe and Profile Line

- NRM 3.5" PM III extruder
a. 32:1 L/D ratio
b. 100 HP, 1750 rpm motor
c. 17.44:1 gearbox ratio
d. Water cooled, non-vented extruder
e. Year: 1996
- Pro Rate 4-station color blender
- Gatto vvacuum sizing tank
a.

For more details on NRM 3.5" Pipe and Profile Line click here

30" Wide Berlyn Sheet Line

Consisting of:
- 4.5" Berlyn extruder
- 24:1 L/D ratio
- Water cooled barrel
- Belt driven Reliance 150HP DC motor
- Burton Industries speed stat VI drive
- 500 Volt
- 13.95/1 gear box ratio

- Gear box rating 222
- 1.

For more details on 30" Wide Berlyn Sheet Line click here

42" Wide Egan Sheet Extrusion Line

- Extruder vented barrel
- Screw size: 3.5"
- L/D ratio: 28:1
- Cooled water
- Horsepower 100 direct current
- Voltage: 480
- Controls Omron E5CK
- Includes 3-roll vertical chrome stack (rreplaced 2005) 12" OD x 42" wide
- 1 heavy duty die 39" wide
- 3.

For more details on 42" Wide Egan Sheet Extrusion Line click here

Monday, August 10, 2009

PVC Pipe Plant

We have available a PVC pipe plant details as under:
- Kolsite make twin screw 90mm extruder of 1997.
- Sizes of PVC pipes can be made minimum 90mm to 400mm.
- Average production capacity 250 kg too 350 kg.

For more details on PVC Pipe Plant click here

PVC Pipe Line

We are looking for PVC pipe line as per requirements as under:
- Extrusion machine Windsor twin screw RC 100
Temperature zone (extruder) 150 to 200 deg. C. adjustable with PID controller
Vacuum tannk & vacuum pump
- Die sizes: 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm
MOC: MS with hard core plating, single piece die without joint,
Die construction: vacuum sizing (20, 25, 32) pressure sizing (40mm to 110mm)
- Die head 2 nos.

For more details on PVC Pipe Line click here

Thursday, August 06, 2009

Kolsite Pipe Plant 200 kg/hr.

We have two old plant model KET-65/18V year of 1994-95 and 1997-98.
Model: KET-65/18V
- Output up to 200 kg per hour
- Die head: 200/400 and one pin and bush with traction, cutter and spray tank aand tilting table
- Size: 63mm to 200mm
- DC drive make: IEEC (all three drive) and Siemens make
- One mixer cooler 60 Kgs/hr.

For more details on Kolsite Pipe Plant 200 kg/hr. click here

2 Layers Blown Film Line

This line is for production of 1 and/or 2 layers co-extrusion for production of heavy duty tubular film.
- Output: 180 Kg/hour

Materials to be processed:
- LDPE, LDPE / LLDPE blends
- LDPE / HDPPE blends
- LDPE + EVA (external layer)
- LDPE + VLOPE

Product specifications:
- Tubular film widths with die diam.

For more details on 2 Layers Blown Film Line click here

PVC Pipe Plant

We are looking for pipe plant for PVC pipes
- Prodn. output: Approx. 250-300 kgs/hr.
- Preferred brand: Windsor, Kolsite


For more details on PVC Pipe Plant click here

Multilayer Cast Extrusion Lines

1) Reifenhauser/Bandera 3 layer cast line
- Year: 1994
- 3 x extruders
- Screen changers
- Automatic die head
- Chill roll
- Thickness control
- Automatic rewinder
- Film width: 2600mm

For more details on Multilayer Cast Extrusion Lines click here