90mm Barmag Extruders

Used 90mm Barmag 30/1 L/D non-vented extruder. Barrel centerline height 39", electrically heated. Extruder is type 9 E10/30 D. Gearbox model 9 E805-32/6V. Has water cooled top center feed throat 4.5" x 6". Includes stainless steel hopper approximately 12" x 10" x 12" high.
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1860&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Kolsite Monolayer Blown Film Plant

Make: Kolsite
Year: 1998
Size: 45 mm with rotating die
Attached corona treater
4 station surface winder
on line slitter
32 inch take up roller
32 treater attached
15HP DC Drive
Output 35 kg per hour
Location: Daman
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1873&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

3 Layer Rotating Platform Kieffel

We have on sale a very sparingly used Kieffel 3 layer machine. Machine consists of 3 extruders 250 mm die Rotating platform Working condition machine We intend to sell only the extrusion system. Take up and other downstream will not be sold.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1895&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

2 Layer Rotating Platform Kieffel

We have on sale a very sparingly used Kieffel 2 layer machine. Machine consists of 3 extruders 250 mm die Rotating platform Working condition machine.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1896&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

3 Layers Blown Film Plant

Make- DGP Windsor India Ltd.
Model - TF-AT 1250/50 Output- 110kg/hr.
lay flat width
Total Connected load - 133kw
Screw and barrel size - 50mm dia.
Die - size 300mm die and 1.5,2.2mm die lip gaps for HDPE, LLDPE and LDPE
Cooling ring - Dual lip type and size
All extruder and die mounted on the rotating (Oscillation) table
Take up unit- two pressing roll (steel and rubber roll), size 1250mm
Winder unit - fully Automatic, Auto stilting
Additional nip- steel and rubber rolls
Size- 1500mm
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1785&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Kolsite Three Layer Blown Film Plant

Model KMF - 22055
Make - Kolsite
Three Layer Blown Film Plant to manufacture film upto 1200mm layflat tubing and minimum 100 gauge consisting of 3 nos. single screw extruders with suitable DC main drives, hoppers, barrels, screws, cross head and die, complete set of heaters for barrels, control cabinet with micro processors temperature controllers, aerodynamic type double lip air cooling ring with blower, vertical take off unit with nip rollers, flattening boards, bubble guide basket, Oscillating Haul-off and semi-automatic two station surface winder. Complete with electrical and drives as detailed in the specifications.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1784&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

SWISSCAB 90 mm 24D Insulation /Sheathing Line,

-Gantry type pay off,disc brake for drums sizes 2500 mm
-Inlet braking cateroillar
-Straightener for semi rigid conductors
-Swisscab extruder ES90-24D model,with hopper and drye for pellets
-Swisscab crosshed model SM45
-SS cooling trough
-Hot foil marker
-Spark tester
-Output caterpillar
-Gantry type take up for drums sizes 2500 mm

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1224&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Turnkey Plant for Multilayer Expanded Polyethylene

Completely refurbished turnkey plant complete with technology and know-how for multilayer (3 layer) EPE sheet from LDPE and recycled EPE scrap (punched skeleton &/or side trimmings) - for producing - proven and approved quality EPE sheet. Guaranteed Capacity: 900 Kg/day (24 Hr), for producing: 2.8 Million (25 mm X 1.6 mm 300 BD) per day of EPE wads used as seals in ROPP caps or for making induction sealing closures

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1830&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Used Reifenhauser Sheet Extrusion Line

Used Reifenhauser sheet line chill roll polish roll stack including:
- One Luwa melt pump with motor
- One 3-roll stack with 24"dia. (600mm) x 86" (2185mm) face, five rolls, two re-chromed and unused, all mirror polish and in excellent condition including "tilt stack" provision
- One haul off with rubber covered rolls 8"dia. (200mm) x 86" (2185mm) face.
- One pump group for the three rolls with individual pumps, heat exchangers, for each roll.
- One cooling conveyor.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1845&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Used Co-Extrusion Sheet Line for Styrene & PP

One 4.5" (120mm) Bridge NRM extruder 24:1 vented with feeding equipment, and one 1.5" (38mm) co extruder, control panels, variable speed, Maag 70/70 melt pump, chill polish roll stack 43" face width (1095mm) x 12" roll diameter (305mm) conveyor, pull rolls and winders 2 position Maier type center drive hydraulic type, total line system including die condition good, some minor upgrade work required.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1846&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

73" X 24" Marshall & Williams W/6'' 32/1 NRM

Used NRM/Marshall & Williams sheet extrusion line manufactured in 1991. Line last used to extrude up to .310 (8mm) thick fractional melt (.25) LDPE sheet at rates to 2600 lbs. Per hour. Line consists of the following: a) 1 used 6" 32:1 NRM extruder having an electrically heated, liquid cooled (closed loop) barrel at a 42-1/2" centerline height but currently mounted on movable base supplying total 84" center line height. Feed throat is center oblong measuring 7" wide x 13" long. Gearbox has a reduction ratio of 17.16:1 and is direct driven by a 400 HP DC motor with SCR controller.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1799&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

70 mm Co-Rotating Twin Screw Extruder

Used 70mm Werner & Pfleiderer model ZSK 70 co-rotating twin screw extruder. New 1995, has electrically heated water cooled barrel, direct connected to 300 HP DC motor with SCR control.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1855&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

47mm JSW Co-rotating Twin Screw Extruders

Used 47mm JSW co-rotating twin screw extruder, Model Tex 44 XSST-45.5 BW-6 V. Has 42 L/D, co-rotating screws maximum 474 RPM screw speed. Has a 12 barrel section, including 3 vent sections and 3 side feed. Includes 2 JSW side feeders model TSF-45. Each 45mm, 24-240 RPM. Includes strand die. Primary extruder is driven by a 55 kw DC motor with drive and new temperature control panel with eurotherm instruments included. Last used on nylon @ 200-250 kgs/hr includes placon strand cutter with 26-blade helical rotor.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1853&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

1999 Barmag Extruders

Used 90 mm Barmag single screw extruders. Driven by AEG 60KW AC motor with SBA Inverter drive. Gear box model 9E805-32/6V with 10.002/1 reduction. Last used on Nylon66 at 500 pounds/hour. 14 Extruders available, with five model 9E10/24D 24/1 L/D units and nine model 9E10/30D units.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1829&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery