Betol Betopac Tube Lines

Used Betol Betopac tubing/straw line consisting of the following: 50 mm Betol model 5025 s/n a8383 24/1 l/d non-vented extruder with electrically heated air cooled barrel. Has 14 kw DC motor. Includes gearbox with 13/1 gearbox ratio, belt driven to DC motor. has hopper, water cooled feed throat, 6-zone temperature panel which is missing 1 controller and hollow tube die last used for ear care products. downstream includes 8" x 96" stainless steel water bath with 20" vacuum section including pump, 8" x 8" x 192" stainless steel cooling bath, each bath equipped with adjustable base and mounted on castors, betol combination haul off/fly knife cutter model 1210/2 including belt take away. Includes 115 KVA (sturdy) transformer, 480/415 volt "on line", 3-phase 60 HZ, 138/160 AMPT.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1805&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

116" Black Clawson Cast Film Unit

Used 116" wide Black Clawson film cast embossed station with 24" diameter matte primary casting roll, 12" chrome back up roll, 12" pick off roll and 16" rubber nip roll. All rolls equipped with rotary unions. Includes approximately 15 HP DC motor.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1804&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

PVC Pipe Plant Machinery

We are running two pipe plants in India. We want to sell the one whole PVC Pipe Plant machinery.
The PVC pipe plant machinery includes
- Hot and Cold Mixture
- Twin Screw Extruder Pipe (Kolsite)
- Screw diameter: 65mm
- Water Cooling Tank
- Caterpillar - Cutter
- Vacuum Pump.
You'll get the complete setup plant for PVC pipe. (Including all the die heads ranging 2" to 10")

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1787&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

78" Wide X 30" Dia General Vacuum Metallizer

Used 78" wide General Engineering vacuum metallizer. Reported to be able to metalize between 39" to 78". Maximum rewind diameter is 30". Thickness range as follows: 14 to 500 gauge polyester, 200 gauge low density polyethylene, 60 gauge rigid PVC. 15 heater boats with individual control. Boats are intermetallic. 4 CRYO panels. 3 polycool chillers. Speed is approximately 1200 feet per minute. Stokes diffusion pumps. 3 stoke pumps are model 412-133, 15 HP, 412-11 15 HP, 412-11 10 HP. 2 mechanical booster pumps, 7500/5000 CFM. Machine is capable of metallizing on both sides of film. 82" wide cooling drum, approximately 16" diameter. Mt hope bowed roll. Load cells on shafts. Some rolls slip driven (tendency drive). Includes spare stokes pump.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1827&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

40" Wide X 30" dia General Vacuum Metallizer

Used General vacuum roll/roll metallizer. One meter wide machine. Type sers/1905/PH. previously used on 5 M polyester film. Capable of rewinding approximately 30" OD roll. Reported max. speed 1500 FPM. 9 boats 250mm x 19mm x 12mm. thickness range 1-10 OHMS. Fixed CRYO panel. Max tension 16o ZS/inch. 5 T 1 programmable control system.
- 30 HP mechanical booster pump,
- 10 HP booster pump,
- 15 HP Kinney vacuum pump,
Harris chiller, polycold cryo generator, alpha chiller, pillar treater and main control panel. 480 volt Infeed and Cleveland kidder tension control for payoff and take-up. Unit designed for plastic and lacquered paper unit reported

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1826&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

92" Sano Cast Film Unit with EDI die

Set of cast film downstream last used in the extrusion of LDPE, LLDPE and PP cast film. Package includes: a) one used EDI 86" wide EDI auto flex h-40 cast film die with mechanically adjusted deckling provision. Die serial number 91-14187. b) one EDI air knife c) one used Sano 92" wide cast film unit having a 24" O.D. main embossed cast roll, 18" O.D. chrome roll and 8" OD rubber back up roll. Includes spare main cast roll. Serial number j1201760.76. New 11-9-91. d) Aeonic 119" wide thickness gauge which is coupled to the EDI die for auto gauge control with controls and spare thickness gauge.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1803&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Used 6" Gloucester Blown Film

Used 6" Gloucester blown film line consisting of the following: 6" Gloucester 24/1 l/D extruder. Has electrically heated air cooled barrel, gearbox direct connected to 400 hp dc motor with electro-stat via drive, 460 volt ac input. Gearbox equipped with 18.41/1 gear ratio. Includes 10-zone temperature control panel (1 zone missing) utilizing barber Coleman model 480 instruments. Extruder serial #266-16034-01, model #266-001.
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1802&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

4.50" Gloucester Blown Film Line

Used 4.5" Gloucester blown film line consisting of the following: 4.5" Gloucester 24/1 l/d low boy extruder model 244-001, serial #244-14911-01. Has electrically heated air cooled barrel, direct connected to 200 hp dc motor with SCR control. Includes 8-zone temperature control panel utilizing barber Coleman model 580 instruments.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1801&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

NRM / Marshall and Williams Sheet Extrusion Line

Used NRM / Marshall and Williams sheet extrusion line manufactured in 1991. Line last used to extrude up to .310 (8mm) thick fractional melt LDPE sheet at rates to 2600 lbs. per hour. Line consists of the following:

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1560&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Italian PVC Foam Sheet and Profile Line

We have on sale a PVC Foam Sheet and profile manufacturing unit

The unit was established in 1991 and has been very sparingly used. Average utilization has been under 15% until 2003. Thereafter the unit was shut but machines have been well maintained. It should be possible for the buyer to restart the plant within 3-4 weeks.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1639&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

70"X12" APV Sheet Extrusion Downstream

Used 70" wide APV sheet extrusion downstream. Package includes, 12" x 70" 3-roll stack (3 matte finishes 1 polished chrome), each roll with individual roll drive utilizing 3 HP AC motors with Sabina inverters. 208/230/460 volt AC input for roll drives. Chrome roll stack is hydraulically loaded and includes 5 hp hydraulic pumping system and built under frame temperature system. Has 64" wide x 141" long cooling roll conveyor, and 8" x 70" wide nip roll assemble with approximately 5 HP AC gear head motor.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1798&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Kolsite Three Layer Blown Film Plant

Model KMF - 22055
Make - Kolsite

Three Layer Blown Film Plant to manufacture film upto 1200mm layflat tubing and minimum 100 gauge consisting of 3 nos. single screw extruders with suitable DC main drives, hoppers, barrels, screws, cross head and die, complete set of heaters for barrels, control cabinet with micro processors temperature controllers, aerodynamic type double lip air cooling ring with blower, vertical take off unit with nip rollers, flattening boards, bubble guide basket, Oscillating Haul-off and semi-automatic two station surface winder. Complete with electrical and drives as detailed in the specifications.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1784&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

3 Layers Blown Film Plant

Make- DGP Windsor India Ltd.
Model - TF-AT 1250/50
Output- 110kg/hr.
lay flat width
Total Connected load - 133kw

For more details please click on the following link

http://plastemart.com/usedMachinery_popup.asp?ref_no=1785&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

PVC Pipe Extruder Plant

Kolsite 65-22V PVC pipe extruder
Output - 250 kgs/hr
With entire down stream machinery (Cooling tank, Haul Off, Cutting Unit & Tilting Table)
A 200 X 400 die head with 200mm CL-I Die Mandrel and sizer also included for sale.
Running plant can be seen at our works before purchase.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1783&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Co-extrusion HDPE Pipe Line

Still in operation Main extruder is a 4.5" Davis Standard, and the co-extruder is a 2.5" Davis Standard complete with hoppers and loaders. The co-extrusion Die has tooling and calibration sizes from 19 mm up to 150 mm. The line has a facts control system and an ultra sound scanner for OD, wall and ID "on the fly" measurement

For more details please click on the following link
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1778&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Windsor Pipe Extrusion Plant

- Make Windsor
- Model: KTS -300
- Year 1994 in excellent working condition
- Presently running 24/7 at our plant
- Running machine can be witnessed.
- Complete line available with 250 X 600 die head and all die mandrel sizers starting from
4" ASTM to 8 " ASTM for SCH 40
& SCH 80, + IS: 4985 - 160 mm to 250 mm CL - 1, 2 & 3. Jogendra Mixer (100 kgs / batch) also available with the extruder.

For more details please click on the following link
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1777&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

100 kg/hr Tape Line with Winder and Looms

- I.P Make Tape Plant-65mm Output -105 Kg to 115 Kg / hr With 120 Nos Winder, Cooling Tower Mode -1 Unit - 6 Shuttle Looms - Capacity -39" Tube -4 Unit - 4 Shuttle looms - Capacity -28" Tube - Juy make -12 Units

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1719&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Extrusion Film Plant

We need a high output blown film extrusion line to process recycled LDPE along with Bags on roll machinery
- Desired output 80 to 100 kg / hr
- 36 inches tubing diameter

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1754&prefix=UM&bs_status=B&prodarrstr=Search Used Machinery

Monolayer Blown Film Plant

Raju Engineering Plant of Monolayer Blown Film
Maker-1994 / 1995 year.
Size: 50 mm / 28 inches Width
Rotating Die
2 Station Winder for Lay flat film
Die - HM / HD / LD / LLDPE / Foam (also)
Panel Board - IEC Company
All Synchronize System, Teco System with Main motor.
Extra Accessories also

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1747&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Three Layer Film Plant

Screw Diameter : 55mm
Output : 150 Kg/Hr.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=964&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Kalimata Bi-Layer Film Plant

We are convertor for a leading corporation and have with us the following machines for sale.

Our machines are in excellent running condition and necessary trials can also be wittnessed after price finalization.

For more details pleas click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1683&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Multilayer DGP Windsor Extrusion Film Plant

We are convertor for a leading corporation and have with us the following machines for sale.

Our machines are in excellent running condition and necessary trials can also be wittnessed after price finalization.


For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1684&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Three layer Klockner Windsor Film Plant

We are convertor for a leading corporation and have with us the following machines for sale
Our machines are in excellent running condition and necessary trials can also be wittnessed
after price finalization.


For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1685&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery111

3 Layer Blown Film Extruder Plant

Make- DGP Windsor India Ltd.
Model - TF-AT 1250/50
Sr. No. - T2K 57 AND T2K 58
Out put- 110kg/hr.
Total Connected load - 133kw
Screw and barrel size - 50mm dia.
L/D ratio- 24

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1720&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

5 Layer Film Extrusion Plant

Used 5-layer Egan blown film line new 1990. Line consists of 2" and 2.5" 24/1 I/D Egan extruders all equipped with barrier screws and mixing sections.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1721&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Used Kolsite 200 kg/hr Twin Screw Pipe Plant

- 65 /18 V Plant
- Model: 1994-95 DC Plant Out Put Up to 200 kg / Hrs
- Only One Die is available 75 mm Only with Pressure Tank
- Make: Kolsite with DC Drive IEEC Make

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1704&prefix=UM&bs_status=S&prodarrstr=Search

Windsor Used Pipe Extrusion Plant

- KTS - 170 - Model
- 2000 AC Plant out Put Up to 170 Kg / Hrs
- Only One Die is Available with Vacuum Tank
- Make: Windsor

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1706&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

PVC Extrusion Plant for Pipe and Casing Capping

- Extruder - 65 mm Dia
- Screw and Barrel
- 65 mm dia (En-41) material, nitride and screw hard chrome plated
- Motor - 5 HP AC electric motor
- Reduction Gear Box
- Reduction gear box in built trust hosing type (helical)
- Blowers - 2 Nos. of blowers for barrel over heat shooting
- Die Set four set of Casing and capping Die.12 / 20mm, 22 / 25mm, 25 / 30mm, 25 / 32 mm

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1715&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

2001 Kolsite PVC Pipe Plant

Kolsite PVC pipe plant complete line
Screw size 65mm
Output 250 kg hour capacity
Die set available for sizes 50mm to 110mm
Mixer Cooler with Complete line

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1701&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Cincinnati 250 kg/hr Pipe Plant

- CM-55
- Model: 1990 AC Converted Plant Main Drive Denforce and Haul, Feeder Drive Kirlosker Make - Die Up to 63 mm to 250 mm Plant is in Running Condition with Pressure Sizing.
- Make: Cincinnati Original
- Out Put Up to 250 kg / Hrs

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1703&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Used Kolsite 200 kg/hr Twin Screw Pipe Plant

- 65 /18 V Plant
- Model: 1994-95 DC Plant Out Put Up to 200 kg / Hrs
- Only One Die is available 75 mm Only with Pressure Tank
- Make: Kolsite with DC Drive IEEC Make

For more details please click on the following link
ref_no=1704&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

100 Kgs/ Hr Twin Screw Pipe Plant

- 52 / 18 V Plant
- Model: 1994-95
- DC Plant Out Put Up to 100 KG / HRS
- Die up 20 mm to 110 mm With Vacuum Calibration
- Sleeve Vacuum Tank: 1mtr Length (Total Length -3 meter)
- Make: Kolsite with DC Drive IEEC Make

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1702&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Lohia Tapeline

Output : 250 kgs
T Die : EDI 1100 mm
With Oven & 172 Winders
Extruder motor : 110 Kw
Universal Screw for PP & HDPE
Machine overhauled 2 yrs back
Year of purchase :1985

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=674&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

50 kg/hr Tape Line

We have a 50 kg / hr Tape plant on sale
Original machine is from Kolsite We have retrofitted a T die.
Winders 108 nos.
Hot plate, covered with ceramic industries
Original machine 1987 but major alteration and alteration done in 2000.
70mm Screw Size,
Output can go upto go up to 80 kg / hr
Screw barrel replaced in 2002-2003
L/D is 1:30/-
AC drive LG inverter,
Pneumatic system for goddets,
Even at 650 denier power consumption is 0.5 units / kg.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1688&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Complete LOHIA - LOREX-1000

Raffia Tape Line and LOHIA make FIL-23
Cheese Winders
Suitable for the mfg of HDPE / PP TAPES (HDPE / PP Woven Sacks)
Extruder - year of installation 2001
Make - LOHIA-LOREX-1000
Cheese Winders: LOHIA-FIL-23
Qty - 180 Nos
T-Die - 1200 mm
Make - EDI (USA)
Condition - Very Well Maintained and in Excellent Working Order and condition. Currently in regular Operation and getting a production of approx 260 Kgs per hour regularly.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1697&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Windsor PP Blown Film Extruders

We have on sale 3 running Windsor PP blown film extrusion lines as follows:
PP Extruder of 750 mm width
Make Windsor
INR 2,25,000
Year of Mfg 1994
PP Extruder of 750mm width
Make Windsor INR 2, 75,000
Year of Mfg 1995

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1650&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Three layer Klockner Windsor Film Plant

We are convertor for a leading corporation and have with us the following machines for sale Our machines are in excellent running condition and necessary trials can also be wittnessed after price finalization. Machine Make - Multilayer (Three Layers) Klockner Windsor - TFK 1250 Total Output - 110 KG. P/ HR. Total Connected Load - 100 KW Die Dia - 12" Film Width Minimum - 430 MM Film Width Maximum - 1250 MM Roller Width - 1250 Gauge Minimum - 80 Gauge Minimum - 400 Gauge Tolerance Control - (+/-) 5% Rotating Platform Accessories Treatment Unit - IEEC Accessories Edge Guider - E/ L.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1685&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Complete Tape Plant with Looms

We are one of the largest woven sack manufacturers in India. We have major expansion plans and wish to replace 4 of our existing lines with higher output machinhes. These machines are in excellent working condition and the only reason for selling them is to upgrade our facilities. The following 4 lines are available for sale 1 Lohia LOREX 1000 - 280 kgs/hr-1994 2 Lohia LOREX 1000 - 280 kgs/hr-1996 3 Kolsite KMF 23900 - 280 kgs/hr-1998 end 4 Kolsite KMF 23900 - 280 kgs/hr- 1999 As part of our modernisation program we also wish to sell the following looms.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1350&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Woven Sack Tape Line

Original plant is a 90 mm Windsor 1998 machine. Screw and Barrel replaced from Lohia Machines The output is 250 kgs/hr Plant is suitable for both PP and HDPE Both, Both hot plate and oven are available T die -- 1050 mm 160 winders of Windsor The plant is under operation

Please click on the following link for more details
http://plastemart.com/usedMachinery_popup.asp?ref_no=1125&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

110mmKraussMaffei1989

Complete line with dosing units, calibration and cooling tank, pipe belling machine.KMD 110 PVC Pipes 110-200mm.
Present Condition:
Machine under operation

For more details please click on the fowwing link
http://plastemart.com/usedMachinery_popup.asp?ref_no=142&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Mamta Side Sealing Machines

750 mm Double seal, Lip seal, gusset etc.(no D-punch)

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=782&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Spares for HDPE sheet plant

1.Imported Screw of 90 mm Diameter.
2.Imported Barrel of 178 mm Diameter.
3.5 Nos. (1 nos. Design & 4 nos. Plain Mirror finish) calendar rollers of 215mm Diameter X 1300 mm.
4.Rubber roll set (2 nos.).
5.Other Spares & parts i.e.
a).Middle MS wheel - 1 Nos.
b).Top bottom wheel - 3 Nos.
c).24" Pully - 1 Nos.
d).12" Worm wheel shafting (For up & down of roll) - 3 Nos.
e).Worm - 7 Nos.
f).Breaker Plates - 2 Nos.
g).Spare Oil Pump - 2 Nos.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=804&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

EPS Hydraulic Shape Moulding Machine

EPS Fully Automatic Hydraulic shape Moulding MachineAny reputed make Good working condition

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=982&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Pipes & Profile machinery

Single screw extruder, diameter : 65mm suitable for pipe & casing, caping in PVC .Water tank/vacuum tank with vacuum pump of 5 H.P.Caterpillar with 2 H.P, D.C.Motor.Cutters with 1 H.P.motor, limit switch etc.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=814&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Second Hand KTS 250 Windsor 1996 Extruder

Twin screw extruder for making PVC Pipes. Screw barrel was changed on 11/3/06. We are getting full 250 Kg/hr output. This unit is with complete downstream equipment i.e. a 6 mtrs cooling tank, Haul off, cutter & a tilting machine. This is a pressure sizing machine capable of producing pipes upto dia 200 mm. Dies for size of 110 mm & 160 mm are included with the machine.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1375&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Complete Pipe Manufacturing Plant

DGP Windsor extruder - 1999. Model KTS-200 complete with downstream equipments. -D.G. SET:- Make Caterpillar 380 KVA. Complete with switch gear and control Panel. Only logged 12,000 hours -Cooling Tower. -Belling Machine Kabra Make. -Threading Machine (Ludhiana) -Chilling Plants: 2 Nos. -Compressors 2 Nos. -Water pumps, Electrical Motors for Compressed Air/Water line. -Hot and cold mixers 2 Nos. -Dies, Die head pins, bushed, sleeves for complete range for 50, 63, 75, 90, 110, 140, 160, 180, 200 & 250 mm Dia -Full fledged laboratory suitable for all tests necessary for ISI certification. -Weighing Scale, Measuring instruments, Hopper Loaders, Overhead Crane, & Chain pulley. Output:- DGP Windsor 200 Tons per month on 25 days working Plant has over 250 meters of internal asaphalted roads, workers quarters, genset room, oofice block, concrete wall.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1421&prefix=UM&bs_status=S&prodarrstr=Search

Gloucester Blown Film Line with Printing and Gusse

USED 4.5" GLOUCESTER BLOWN FILM LINE CONSISTING OF THE FOLLOWING: 4.50" EXTRUDER 94" GEC 200HP DC 90" PRINTING POST GUSSETING BOTTOM SEAL BAG MACHINE 4.5" GLOUCESTER 24/1 L/D LOW BOY EXTRUDER, SERIAL #244-14917-01. HAS ELECTRICALLY HEATED AIR COOLED BARREL, HAS 8-ZONE TEMPERATURE CONTROL PANEL UTILIZING BARBER COLEMAN MODEL 580BC INSTRUMENTS, AND 200 HP DC MOTOR WITH SCR CONTROL DIRECT CONNECTED TO GLOUCESTER GEAR BOX. GEAR BOX EQUIPPED WITH 17.50/1 RATIO. EXTRUDER INCLUDES 3-COMPONENT PROCESS CONTROL VOLUMETRIC BLENDER, AND EQUIPPED WITH HOPPER AND (2) SCREW FEEDERS. DOWNSTREAM INCLUDES 22" STATIONARY DIE WITH CART AND DUAL LIP AIR RING, POLYCOOL WITH 20 HP MOTOR AND BALDOR AC VECTOR VARIABLE SPEED DRIVE FOR BLOWER MOTOR.

Please click on the following link for more details
http://plastemart.com/usedMachinery_popup.asp?ref_no=1628&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Windsor PP Blown Film Extruders

We have on sale 3 running Windsor PP blown film extrusion lines as follows: PP Extruder of 750 mm width Make Windsor INR 2,25,000 Year of Mfg 1994 PP Extruder of 750mm width Make Windsor INR 2, 75,000 Year of Mfg 1995 PP Extruder of 750mm width Make Windsor INR 2, 75,000 Year of Mfg 1995 We also have on sale a Chilling Plant of 7.5 Tons INR 1,25,000.

Please click on the below link for more details
http://plastemart.com/usedMachinery_popup.asp?ref_no=1650&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Item A: Counter Rotating Twin Screw Extruder

Used Betol tubing/straw line, new 1989. Line consists of the following: Betol model 5025, 50 mm extruder serial number 5170. Extruder is belt driven from 14 kw DC motor controlled to torque arm reducer. Extruder is electrically heated air cooled, has 42" center line height, and equipped with integral 6 zone temperature panel. Unit had 5 eurotherm instruments which are missing but has (1) luv controller. Downstream includes straw die, hopper, foremost color feeder, c-clamp, betol model 119/72 8"x 96" tank with 20" vacuum section,8" x 8" x 192" cooling tank, Betol model 1210 puller/fly knife cutter and 4" wide x 8' long belt take away. 2.00 BETOL MDL 5025 EXT 14 KW DC/SCR
Terms & Condition:
Price US$ 25,000
Location:USA

Extrusion Lamination Plant

We need an extrusion lamination machine, preferrably Korean Make Substrate will be Polyester - Aluminium foil We prefer a Tandem lamination used machine in good condition Required width 1300 to 1500 mm Machine is required in Central India

Welex Extrusion Sheet Extrusion Line

Welex Co Extrusion complete sheet line incl: Yr. of mfg, 1996, S# 6367 3-1/2" (90 mm) screw diameter, x 30:1 L:D vented extruder, Electrics 415/3/50 fed with Moretto Materials feeding system, and Piovan Dryer Model T100 1X S# LA 656, and McGuire Model 4 ingredient Model WSB-900 feeder/blender. Extruder water cooled, electric heating, Temperature control panel, 12 control zones, Welex hydraulic slide plate screen changer with Hydraulic power pack, Welex Melt gear pump with controls, inline static mixer, ; Welex co extruder, Yr. of mfg, 1996, S# 6360 electrics: 415/3/50 2" (50 mm) non vented electric heated barrel, air cooled, temperature control panel, 5 zones, with manifolds to co extrusion block, Welex co extrusion block , die EDI type die, flex lip with restrictor bar, 43" (1092mm)

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1644&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Welex Co Extrusion Sheet Line

Welex Co Extrusion complete sheet line incl: Yr. of mfg, 1997, S# 6500 voltage 415/3/50 Extruder; 3-1/2" ( 90.0mm) screw diameter, 30:1 L:D vented, barrel water cooled, electric heating, Temperature control panel, 12 control zones, Entek hydraulic slide plate screen changer with Hydraulic power pack, Welex Melt gear pump with controls, inline static mixer, ; Welex co extruder, Yr. of mfg, 1997, S# 6502 electrics: 415/3/50 2" 50mm) non vented electric heated barrel, air cooled, temperature control panel, 5 zones, with manifolds to co extrusion block, Welex co extrusion block , EDI H-100 flex lip sheet die, 66" (168cm) width.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1643&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Italian PVC Foam Sheet and Profile Line

We have on sale a PVC Foam Sheet and profile manufacturing unit. The unit was established in 1991 and has been very sparingly used. Average utilization has been under 15% until 2003. Thereafter the unit was shut but machines have been well maintained. It should be possible for the buyer to restart the plant within 3-4 weeks. We can also offer the complete business on sale along with accumulated losses and corresponding tax benefits. For details of plant and machinery click on following pages.

For more information please click on the following link
http://plastemart.com/usedmachinery.asp?cat_id=1226&prodname=Used Extrusion Sheet Lines#1

PVC Injection Moulding Machines

We are in process of disposing excess PVC injection Moulding machines which are in good working condition, Make - Windsor Year of manufacturing - 1995 Model - SP 180 DD, Qty - 1 no. Clamping force - 180 Ton, Ram type Max. Shot weight for PVC - 600 grams Min. /Max. Mould height - 350/550 mm Tie bar distance (H x V) - 430mm x 430mm Drive load - 30kw, Heating load - 12.1 kW PLC - M Type Arico make. Overall machine dimensions - (LxWxH) - 5.55m x 1.38m x 1.97m.

Used PE Pipes Production Line

We are looking for a used PE pipes production line with reasonable price and fair operating conditions To produce long length PE pipes (in coils). The basic line specifications and working parameter are as follow: - Pipe nominal diameter 16-20-25-32-40-50-63-75-90-110 mm. - Estimated line output: 130 to 200 kg / hr depending on pipe diameter - Pipes weight Kg/meter: Ranging from 0.077 to 2.5 kg/m - Pipes material: LDPE - MDPE -HDPE - Packaging: Winded

Straw / Tubing Extrusion Line

Used Betol tubing/straw line, new 1989. Line consists of the following: Betol model 5025, 50 mm extruder serial number 5170. Extruder is belt driven from 14 kw DC motor controlled to torque arm reducer. Extruder is electrically heated air cooled, has 42" center line height, and equipped with integral 6 zone temperature panel. Unit had 5 eurotherm instruments which are missing but has (1) luv controller. Downstream includes straw die, hopper, foremost color feeder, c-clamp, betol model 119/72 8"x 96" tank with 20" vacuum section,8" x 8" x 192" cooling tank, Betol model 1210 puller/fly knife cutter and 4" wide x 8' long belt take away. 2.00 BETOL MDL 5025 EXT 14 KW DC/SCR.

Extrusion Line for Production of Polyethylene Film

Extrusion Line for Production of Polyethylene Film

Details: Windmoller Holscher
35/65 Extrusion line for production of polyethylene (PELD and PEHD) film
Year of manufacture - 2004
Capacity - 25 MT per month

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1463&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

6" Gloucester Blown Film Line

USED 6" GLOUCESTER BLOWN FILM LINE CONSISTING OF THE FOLLOWING:

6" GLOUCESTER 24/1 L/D EXTRUDER. HAS ELECTRICALLY HEATED AIR COOLED
BARREL, GEARBOX DIRECT CONNECTED TO 400 HP DC MOTOR WITH ELECTRO-STAT VIP
DRIVE, 460 VOLT AC INPUT. GEARBOX EQUIPPED WITH 18.41/1 GEAR RATIO.
INCLUDES 10-ZONE TEMPERATURE CONTROL PANEL (1 ZONE MISSING) UTILIZING
BARBER COLEMAN MODEL 480 INSTRUMENTS. EXTRUDER SERIAL #266-16034-01,
MODEL #266-001.

For more details please click the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1629&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Used Extrusion Machines

For Used Extrusion Machines click on below link
http://www.plastemart.com/Bulletinsubcategory.asp?cat_id=714

Barmag, 3 layer Dual Air Ring Line

We have on sale a 150 kg/hr, Barmag 3 layer line with IBC Gravimetric Feeder Rotating Haul Off 2 Station separate winders Carona Treater Web Guide from Five Width - 1.2 meter 250 mm D ...more

Click below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1467&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Woven Sack Manufacturing Plant

We are leading manufacturers of PP woven sack bags We have a Tape Plant for sale as follows Manufacturing date: 1996 November - Output: 250 kgs minimum per hour - Die width: 1100mm, T ...more

Click below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1499&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Complete Pipe Manufacturing Plant

DGP Windsor extruder - 1999. Model KTS-200 complete with downstream equipments. -D.G. SET:- Make Caterpillar 380 KVA. Complete with switch gear and control Panel. Only logged 12,000 ho ...more

Click below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1421&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

KET 65 x 18 PVC Twin Screw Plamt

We have KET 65 x 18 PVC Pipe Plants 1996 model Complete extruder with Gear Box, Screw Barrel A.C. Motor/Drive (Recently converted at a cost of INR 3,50,000 from D.C.Motor and drive) Heat ...more

Click below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1461&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Dry Solvent Lamination Machine

We have available Lamination Machine for sale. Details: Maximum Speed 180 met / min. Maximum width 1 meter. Along with Hot air Generator. Web aligner for unwinder Dyanaspede Contro ...more

Click below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1412&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Gloucester Blown Film Line with Printing and Gusse

USED 4.5" GLOUCESTER BLOWN FILM LINE CONSISTING OF THE FOLLOWING: 4.50" EXTRUDER 94" GEC 200HP DC 90" PRINTING POST GUSSETING BOTTOM SEAL BAG MACHINE 4.5" GLOUCESTER 24/1 L/D LOW BOY ...more

click below for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1628&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Blown Film Plants with Carona Treater

Used Extrusion Machines
65 mm HM/LD Extruder. - Kalimata. - 3", 4", 7" Rotating Die. - 44" 2-stn surface Winder. - Treater. - IEEC Panel. - 35 kg/hr. - 1999. In production - INR 5,25,000 S. Maharash

Click below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1533

Silicone Coated HDPE Pipe Plant

Used Extrusion Machines
Rajoo REHD9055PL. 2-layer and 1-layer PLB Duct plant. 55 mm 30:1 Groove-feed Extruder with 45 KW AC drives. 10.6 KW heaters. 40 mm 26:1 Extruder with 7.5 kW AC drive. 6 KW heaters. 20

Click on below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1529

Used Extrusion Machines Film Plant - 5 Layers

Used Extrusion Machines
We are one of leading company for reconditioning and distributing specialized in used plastic film extruder in Korea. To expand our business line, we would like to import multilayer film e

Click on below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1497

50 mm HM / LL Film Extrusion Plant

Details:
50 mm HM/LL. Hyden Engg. 12.5 HP DC motor. 2”, 3”, 4” die. Take-up up-down, pneumatic roll. 40” 2-station surface winder. IEEC panel. Output ---- 40 kg/hr.

Year Of Manufacture:
1998

Present Condition:
Working, Good Condition

Click link below for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1107&prefix=UM&bs_status=S

Pet Sheet Line Machinery Co - Extrusion

Used Extrusion Machines
We are looking for a PET sheet line on the following specifications: - Materials to be used: Apet, Gpet, PP - Material status: - Virgin 7-10%, Recycled 85-90% and virgin 7-10% ABA st

Click below link for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1524

Monofilament Extrusion Line

Available on sale a Monofilament Extrusion Line.
Monofilament Extruder : Screw size 175mm Length 6' Take Up- Length : 5'4'' / 7 Godget Rolls Water Tank L x B 15' x 1'2" Production Capacity: 1500 kg / day Date of Errection: March 2000 Bobbin Winder 4 Station suitable for 12 Bobbins L x B 8' x 4' Price --- INR 3,00,000
Twisting Machine 128 Spindels 5.5" Ring Dia x 1" ht Lift : 9 "


Production Capacity: 1500 kg / day
Date of Errection: March 2000

click link below for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1412&prefix=UM&bs_status=S&prodarrstr=Search

Lohia Tape Plant and Cheese Winders

Used Extrusion Machines
The following are available for Sale in excellent running condition for Woven Sack Industry. - Extrusion TAPE PLANT : 1 No. - Make : Lohia Starlinger Limited - Manufacturing Date : Oct ...more
For more details please click following link

http://plastemart.com/usedMachinery_popup.asp?ref_no=1610&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Barmag, 3 layer Dual Air Ring Line

Details:
We have on sale a 150 kg/hr, Barmag 3 layer line with IBC Gravimetric Feeder Rotating Haul Off 2 Station separate winders Carona Treater Web Guide from Five Width - 1.2 meter 250 mm Die Semi Automatic Adex Dual Air Ring

Manufacturer:
Barmag

Year Of Manufacture:
1995

Present Condition:
Excellent condition

Click link below for more details
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1467&prefix=UM&bs_status=S&prodarrstr=Search