Used Davis Standard / NRM profile
extrusion line consisting of the following:
a) 3.5" Davis Standard / NRM extruder, model PM-IV-24-1, 24:1 L/D, electrically heated, water cooled, 75 HP DC motor, 115.
For more details on 3.5" Davis Standard- NRM Profile - Lumber Extrusion Line click here
Friday, July 29, 2011
400 kg/hr 3 Layer Co-Extruded Blown Film Line
Model: Rajoo - Multifoil RECF-2360-70/1600 IBC
- Use: To manufacture blown lay flat film
- Polymers: LDPE, LLDPE, HDPE, HMHD & EVA PP/RC P or blends of either of these
- Finished product: Wound rollls of flattened film
Features:
- Screw diameter: 60 x 2, 70 x 1 mm
- Screw length: 30 D
- Screw speed range: 20-120 / 20-120 rpm
- Additional die: 400 mm
- Maximum output: 400 kg/hr.
For more details on 400 kg/hr 3 Layer Co-Extruded Blown Film Line click here
- Use: To manufacture blown lay flat film
- Polymers: LDPE, LLDPE, HDPE, HMHD & EVA PP/RC P or blends of either of these
- Finished product: Wound rollls of flattened film
Features:
- Screw diameter: 60 x 2, 70 x 1 mm
- Screw length: 30 D
- Screw speed range: 20-120 / 20-120 rpm
- Additional die: 400 mm
- Maximum output: 400 kg/hr.
For more details on 400 kg/hr 3 Layer Co-Extruded Blown Film Line click here
Tuesday, July 26, 2011
Weber Pipe Line
- The line is produced by german company Weber
- The line produces pipes from 355 mm to 800 mm of HDPE pipes (used for water and gas)
- Maximum capacity is 950 kg/hr.
The line consists of the fol
For more details on Weber Pipe Line click here
- The line produces pipes from 355 mm to 800 mm of HDPE pipes (used for water and gas)
- Maximum capacity is 950 kg/hr.
The line consists of the fol
For more details on Weber Pipe Line click here
Kiefel 3 Layer Blown Film Line
- Film structure: ABC
- Material: HDPE
- Width: 1600
- Extruder1 screw diameter: 70
- Extruder1 dosing unit: Plascontrol 3 component gravimetric units, Continous type
- Extruder2 screw diameeter: 80
- Extruder2 dosing unit: Plascontrol 3 component gravimetric units, Continous type
- Extruder3 screw diameter: 70
- Extruder3 dosing unit: Plascontrol 3 component gravimetric units, Continous type
- Head automatic: Yes
- Head die width: 275
- Head thickness control system: Automatic thikness control
- Head notes: IBC, Oscillating take off
- Takeoff unit rotating: No
- Takeoff corona treatment: Yes
- Rewinder type: Single rewinder
- Rewinder width: 1600
- Rewinder automatic: Yes
- Printing unit in line 1+1
- Output: 380 kg (CCA.
For more details on Kiefel 3 Layer Blown Film Line click here
- Material: HDPE
- Width: 1600
- Extruder1 screw diameter: 70
- Extruder1 dosing unit: Plascontrol 3 component gravimetric units, Continous type
- Extruder2 screw diameeter: 80
- Extruder2 dosing unit: Plascontrol 3 component gravimetric units, Continous type
- Extruder3 screw diameter: 70
- Extruder3 dosing unit: Plascontrol 3 component gravimetric units, Continous type
- Head automatic: Yes
- Head die width: 275
- Head thickness control system: Automatic thikness control
- Head notes: IBC, Oscillating take off
- Takeoff unit rotating: No
- Takeoff corona treatment: Yes
- Rewinder type: Single rewinder
- Rewinder width: 1600
- Rewinder automatic: Yes
- Printing unit in line 1+1
- Output: 380 kg (CCA.
For more details on Kiefel 3 Layer Blown Film Line click here
1600 mm Italian Air Bubble Extrusion Line
- The machine has only been used for laboratory demonstrations
- It is in excellent condition and will be sold with a warranty
For more details on 1600 mm Italian Air Bubble Extrusion Line click here
- It is in excellent condition and will be sold with a warranty
For more details on 1600 mm Italian Air Bubble Extrusion Line click here
2300 mm wide Welex Sheet Extrusion Line
- The line is suitable for the production of PS, PP ABS and PE sheet.
- With a die range up to 14mm thick
- It is ideal for a variety of applications
The line which consists of the following ccomponents;
- Welex 150 mm single screw extruder
- Hydraulic lantern slide screen changer
- Welex model GP90 melt pump with DC motor
- Static mixer
- Welex type ABA co extrusion adaptor
- 63 mm Welex co extruder
- 2200 mm wide Verbruggen die
- 90" (2286mm wide) Welex 3 roll polishing stack
- Top and bottom protective film laminating station
- 3 zone pumping group
- 90" wide 2 roll haul off
- 3m wide Femas Guillotine for thick PS and ABS
- Conveyor and sheet stacker
- The output should be in the region of 800 kg plus per hour.
For more details on 2300 mm wide Welex Sheet Extrusion Line click here
- With a die range up to 14mm thick
- It is ideal for a variety of applications
The line which consists of the following ccomponents;
- Welex 150 mm single screw extruder
- Hydraulic lantern slide screen changer
- Welex model GP90 melt pump with DC motor
- Static mixer
- Welex type ABA co extrusion adaptor
- 63 mm Welex co extruder
- 2200 mm wide Verbruggen die
- 90" (2286mm wide) Welex 3 roll polishing stack
- Top and bottom protective film laminating station
- 3 zone pumping group
- 90" wide 2 roll haul off
- 3m wide Femas Guillotine for thick PS and ABS
- Conveyor and sheet stacker
- The output should be in the region of 800 kg plus per hour.
For more details on 2300 mm wide Welex Sheet Extrusion Line click here
Tape Line winders, Oven, Hopper, Mixer
- Winder: KMF Winders Load balance type 0.25HP motor - 240 nos
- Hot Air oven:4meter length 1.6 meter width hot air oven
- Hooper looder: 0.5 HP motor 350 kg / hr capacity with off delaytimer
- Mi
For more details on Tape Line winders, Oven, Hopper, Mixer click here
- Hot Air oven:4meter length 1.6 meter width hot air oven
- Hooper looder: 0.5 HP motor 350 kg / hr capacity with off delaytimer
- Mi
For more details on Tape Line winders, Oven, Hopper, Mixer click here
Thursday, July 07, 2011
Rajoo Engineering PP 2 Layer Machine
Brand: Rajoo Engineering
- Output: 150 kg / hr
- With web aligner
- Size: 10 inch to 36 inch
- All size ring available
For more details on Rajoo Engineering PP 2 Layer Machine click here
- Output: 150 kg / hr
- With web aligner
- Size: 10 inch to 36 inch
- All size ring available
For more details on Rajoo Engineering PP 2 Layer Machine click here
Kolsite 50 mm x 3 Grooved Feed Extruders
- Main motors: 30 HP AC drives
- Rewinder 2 HP DC Drives-2 nos
- Take-up width 1250 mm
- Output: 150 kgs/ hr
- Rotating platform
- Arshad Corona treatment
- Chilling plant
- Cable line with
For more details on Kolsite 50 mm x 3 Grooved Feed Extruders click here
- Rewinder 2 HP DC Drives-2 nos
- Take-up width 1250 mm
- Output: 150 kgs/ hr
- Rotating platform
- Arshad Corona treatment
- Chilling plant
- Cable line with
For more details on Kolsite 50 mm x 3 Grooved Feed Extruders click here
Windmoller & Holscher Blown Film Extruder Plant
- Brand: Windmoeller Hoelsche - 150/30d
- Maximum discharge 1980 lbs/hour (900 kg/h)
337 hp/450 kW
- 440V/ 50 Hz/735 amps.
Comprised of:
- 15.7" (400 mm) diameter blow head with a 33.7 hp/445 kW heater
- 31.
For more details on Windmoller & Holscher Blown Film Extruder Plant click here
- Maximum discharge 1980 lbs/hour (900 kg/h)
337 hp/450 kW
- 440V/ 50 Hz/735 amps.
Comprised of:
- 15.7" (400 mm) diameter blow head with a 33.7 hp/445 kW heater
- 31.
For more details on Windmoller & Holscher Blown Film Extruder Plant click here
Reifenhauser 3 layer Blown Film Extruder Plant
- Brand: Reifenhauser 3 layer blown film line
- Width: 1600 mm
- The extruders are 50mm, 70mm, 50mm
- IBC
For more details on Reifenhauser 3 layer Blown Film Extruder Plant click here
- Width: 1600 mm
- The extruders are 50mm, 70mm, 50mm
- IBC
For more details on Reifenhauser 3 layer Blown Film Extruder Plant click here
Kolsite Three Layer Blown Film Plant, Oscillating Platform
Model: KMF 15745
The plant is currently under production 24x7 producing high quality film for liquid food packaging and maintained in excellent condition with proper maintenance and upgradation proocedures.
For more details on Kolsite Three Layer Blown Film Plant, Oscillating Platform click here
The plant is currently under production 24x7 producing high quality film for liquid food packaging and maintained in excellent condition with proper maintenance and upgradation proocedures.
For more details on Kolsite Three Layer Blown Film Plant, Oscillating Platform click here
65 mm Monolayer Blown Film Plants
- Screw size: 65mm with rotating die
- Approx: 5 year old (In Running Condition)
- Pneumatic take-up unit.
- Double Station surface winder with torque motor (Air-knife Installed)
- Main drive: Cro
For more details on 65 mm Monolayer Blown Film Plants click here
- Approx: 5 year old (In Running Condition)
- Pneumatic take-up unit.
- Double Station surface winder with torque motor (Air-knife Installed)
- Main drive: Cro
For more details on 65 mm Monolayer Blown Film Plants click here
Rajoo 55 mm LDPE/LLDPE/HMHD Single Die Head Film Extruder
Rajoo Engineering make 55 mm LDPE/LLDPE/HMHD Single Die Head Film Extruder
55 mm LDPE/LLDPE/HMHD Blown Film Extruder for the manufacture of LDPE/LLDPE/HMHD Film consisting single screw extrudeer with main motor variable speed drive, hopper, barrel, screw, cross head and dies, air cooling rings with blowers, vertical take off unit, nip rollers, wooden flattening boards for bubble guides complete with electrical and drives as per following specifications;
- Output: 10 to 40 Kg/hr (depending on the size, material and thickness of film)
- Minimum film Thickness: 20 Microns (80 gauge)
- Maximum Film Thickness: 100 Microns (400 gauge)
- Lay flat tubing width: 4" to 30" (100 mm to 750 mm)
- Nip rollers: 32" Length
Extruder:
- Screw diameter: 55 mm
- L/D ratio: 28:1
- Barrel: To suit 55 mm Screw
- Number of zones: 3 zones on barrel
- Hopper: Capacity 75 Kgs.
For more details on Rajoo 55 mm LDPE/LLDPE/HMHD Single Die Head Film Extruder click here
55 mm LDPE/LLDPE/HMHD Blown Film Extruder for the manufacture of LDPE/LLDPE/HMHD Film consisting single screw extrudeer with main motor variable speed drive, hopper, barrel, screw, cross head and dies, air cooling rings with blowers, vertical take off unit, nip rollers, wooden flattening boards for bubble guides complete with electrical and drives as per following specifications;
- Output: 10 to 40 Kg/hr (depending on the size, material and thickness of film)
- Minimum film Thickness: 20 Microns (80 gauge)
- Maximum Film Thickness: 100 Microns (400 gauge)
- Lay flat tubing width: 4" to 30" (100 mm to 750 mm)
- Nip rollers: 32" Length
Extruder:
- Screw diameter: 55 mm
- L/D ratio: 28:1
- Barrel: To suit 55 mm Screw
- Number of zones: 3 zones on barrel
- Hopper: Capacity 75 Kgs.
For more details on Rajoo 55 mm LDPE/LLDPE/HMHD Single Die Head Film Extruder click here
Alpine Co extrusion Blown Film Line
- Model: COEX 3 L
- Film width max: 2000 mm
- Material: LDPE, HDPE
- Output: 250 Kg/ hr
- Material thickness: from 10 up to 100 micron
- No of extruders: 3
- No of layers: 3
Other details:
- Rotating Extrusion group composed by:
a) No 1 Extruder "Alpine", 50 mm screw diameter, 58.
For more details on Alpine Co extrusion Blown Film Line click here
- Film width max: 2000 mm
- Material: LDPE, HDPE
- Output: 250 Kg/ hr
- Material thickness: from 10 up to 100 micron
- No of extruders: 3
- No of layers: 3
Other details:
- Rotating Extrusion group composed by:
a) No 1 Extruder "Alpine", 50 mm screw diameter, 58.
For more details on Alpine Co extrusion Blown Film Line click here
Subscribe to:
Posts (Atom)