Betol Betopac Tube Lines

Used Betol Betopac tubing/straw line consisting of the following: 50 mm Betol model 5025 s/n a8383 24/1 l/d non-vented extruder with electrically heated air cooled barrel. Has 14 kw DC motor. Includes gearbox with 13/1 gearbox ratio, belt driven to DC motor. has hopper, water cooled feed throat, 6-zone temperature panel which is missing 1 controller and hollow tube die last used for ear care products. downstream includes 8" x 96" stainless steel water bath with 20" vacuum section including pump, 8" x 8" x 192" stainless steel cooling bath, each bath equipped with adjustable base and mounted on castors, betol combination haul off/fly knife cutter model 1210/2 including belt take away. Includes 115 KVA (sturdy) transformer, 480/415 volt "on line", 3-phase 60 HZ, 138/160 AMPT.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1805&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

116" Black Clawson Cast Film Unit

Used 116" wide Black Clawson film cast embossed station with 24" diameter matte primary casting roll, 12" chrome back up roll, 12" pick off roll and 16" rubber nip roll. All rolls equipped with rotary unions. Includes approximately 15 HP DC motor.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1804&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

PVC Pipe Plant Machinery

We are running two pipe plants in India. We want to sell the one whole PVC Pipe Plant machinery.
The PVC pipe plant machinery includes
- Hot and Cold Mixture
- Twin Screw Extruder Pipe (Kolsite)
- Screw diameter: 65mm
- Water Cooling Tank
- Caterpillar - Cutter
- Vacuum Pump.
You'll get the complete setup plant for PVC pipe. (Including all the die heads ranging 2" to 10")

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1787&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

78" Wide X 30" Dia General Vacuum Metallizer

Used 78" wide General Engineering vacuum metallizer. Reported to be able to metalize between 39" to 78". Maximum rewind diameter is 30". Thickness range as follows: 14 to 500 gauge polyester, 200 gauge low density polyethylene, 60 gauge rigid PVC. 15 heater boats with individual control. Boats are intermetallic. 4 CRYO panels. 3 polycool chillers. Speed is approximately 1200 feet per minute. Stokes diffusion pumps. 3 stoke pumps are model 412-133, 15 HP, 412-11 15 HP, 412-11 10 HP. 2 mechanical booster pumps, 7500/5000 CFM. Machine is capable of metallizing on both sides of film. 82" wide cooling drum, approximately 16" diameter. Mt hope bowed roll. Load cells on shafts. Some rolls slip driven (tendency drive). Includes spare stokes pump.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1827&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

40" Wide X 30" dia General Vacuum Metallizer

Used General vacuum roll/roll metallizer. One meter wide machine. Type sers/1905/PH. previously used on 5 M polyester film. Capable of rewinding approximately 30" OD roll. Reported max. speed 1500 FPM. 9 boats 250mm x 19mm x 12mm. thickness range 1-10 OHMS. Fixed CRYO panel. Max tension 16o ZS/inch. 5 T 1 programmable control system.
- 30 HP mechanical booster pump,
- 10 HP booster pump,
- 15 HP Kinney vacuum pump,
Harris chiller, polycold cryo generator, alpha chiller, pillar treater and main control panel. 480 volt Infeed and Cleveland kidder tension control for payoff and take-up. Unit designed for plastic and lacquered paper unit reported

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1826&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

92" Sano Cast Film Unit with EDI die

Set of cast film downstream last used in the extrusion of LDPE, LLDPE and PP cast film. Package includes: a) one used EDI 86" wide EDI auto flex h-40 cast film die with mechanically adjusted deckling provision. Die serial number 91-14187. b) one EDI air knife c) one used Sano 92" wide cast film unit having a 24" O.D. main embossed cast roll, 18" O.D. chrome roll and 8" OD rubber back up roll. Includes spare main cast roll. Serial number j1201760.76. New 11-9-91. d) Aeonic 119" wide thickness gauge which is coupled to the EDI die for auto gauge control with controls and spare thickness gauge.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1803&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Used 6" Gloucester Blown Film

Used 6" Gloucester blown film line consisting of the following: 6" Gloucester 24/1 l/D extruder. Has electrically heated air cooled barrel, gearbox direct connected to 400 hp dc motor with electro-stat via drive, 460 volt ac input. Gearbox equipped with 18.41/1 gear ratio. Includes 10-zone temperature control panel (1 zone missing) utilizing barber Coleman model 480 instruments. Extruder serial #266-16034-01, model #266-001.
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1802&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

4.50" Gloucester Blown Film Line

Used 4.5" Gloucester blown film line consisting of the following: 4.5" Gloucester 24/1 l/d low boy extruder model 244-001, serial #244-14911-01. Has electrically heated air cooled barrel, direct connected to 200 hp dc motor with SCR control. Includes 8-zone temperature control panel utilizing barber Coleman model 580 instruments.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1801&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

NRM / Marshall and Williams Sheet Extrusion Line

Used NRM / Marshall and Williams sheet extrusion line manufactured in 1991. Line last used to extrude up to .310 (8mm) thick fractional melt LDPE sheet at rates to 2600 lbs. per hour. Line consists of the following:

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1560&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

Italian PVC Foam Sheet and Profile Line

We have on sale a PVC Foam Sheet and profile manufacturing unit

The unit was established in 1991 and has been very sparingly used. Average utilization has been under 15% until 2003. Thereafter the unit was shut but machines have been well maintained. It should be possible for the buyer to restart the plant within 3-4 weeks.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1639&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery

70"X12" APV Sheet Extrusion Downstream

Used 70" wide APV sheet extrusion downstream. Package includes, 12" x 70" 3-roll stack (3 matte finishes 1 polished chrome), each roll with individual roll drive utilizing 3 HP AC motors with Sabina inverters. 208/230/460 volt AC input for roll drives. Chrome roll stack is hydraulically loaded and includes 5 hp hydraulic pumping system and built under frame temperature system. Has 64" wide x 141" long cooling roll conveyor, and 8" x 70" wide nip roll assemble with approximately 5 HP AC gear head motor.

For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1798&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery